Machine applies servo motor to control spindle to realize welding, and applies pneumatic cylinder force welding.

This machine is mostly applied to weld parts in small measurement, such as the nozzle of engine cover, nozzle of engine air-inlet manifold.

I. Main Features:

1. Servo controls rotation realize orientational welding;

2. MP Sonic intelligent operation system with multiple function including: auto/manual operation, formula system, record system, I/O supervision system;

II. Paid Optional Feature:

MES System: A. Wifi module; B. Remote control and service system; C. Mobile APP operation and control.

III. Main Parameters:

1. Electric Source: 220V, AC, 1P, 50/60Hz;

2. Air Source: 0.5~0.8MPa;

3. Ultrasonic Specification: 15KHz 4200W;

4. Overall Dimension: 850*800*2000.

5. Weight: about 150KG.

Machine applies 7500W electrical motor to control welding spindle at lower jig bed, and applies pneumatic cylinder to force pressure at upper jig from top during welding operation.

Auto trimming tooling is applied to trim material flush cased during welding.

I. Features:

1. High power electrical motor with strong torque output applied for welding spindle, machine welding ability is high to weld child carrier wheels in big diameter;

2. Machine applies?PLC?to control sequence?& HMI?to set machine;

3.?Clip & slide black is available for different jig design requirement;

4. Trimming tooling can be designed on welding tooling to trim material flush cased during operation;

5. Machine system designed with formula function for operation parameter storage and download in convenience;

6. Welding parameter is programmable for different parts design and material;

7. Welding record is available for checking welding history;

8. Alarm system is applied for easy problem shooting;

9. I/O supervision page is designed to display machine condition all the time;

10. Double start buttons, optical fence at front and safety doors at rear side are applied for safety protection.

II. Specification:

Power Source: 380V, 3P, 50/60Hz;

Motor Power: 7500W

Air Source: 0.5~0.8Mp;

Dimension:Dimension: 1410*1140*2490?(mm).

Note: we make?spin welding machine?specification basing on customers requirement.

I. Machine Features:

1. This machine applies servo motor to control welding spindle, applies pneumatic cylinder to control the vertical motion of working table. The welding spindle torque and the welding depth is adjustable. Liquid filling operation controlled separately;
2.? Welding spindle speed can be set in 0~500RPM;
3. Liquid filling volume controlled by timing;
4. Machine control system is designed with formula function, password login function, auto operation function, manual operation function, machine set function, I/O supervision function, alarm protection, etc to fit for requirement.

II. Component Function:

1. Servo welding spindle system;
2. Pneumatic pressure force system and working table elevating system;
3. Liquid filling control system.

III. Benifit:
1. With good work efficiency, each station can be operated separately at the same time;
2. The welding of this machine has the characteristics of high strength and good performance;
3. Adopt automatic control technology to make welding operation easy and simple;
4. No pollution, no waste, more environmentally friendly

IV. Technical Specification:
1.Power Source：380V? 50-60Hz;
2.Spindle Speed:Max 500 RPM;
3.Jig Bed Motion Distance:300mm;
4.Dimension:(L)1720*(W)1010*(H)2098 (mm);
5.Working Room Temperature:10-40℃

It suggests to send us your balancer data for?jointing design?for you before confirm jinjection moulds.

(Read more about spin welding)

II-3Machine Introduction
This equipment uses a servo motor to drive the rotating system, and the servo electric cylinder drives the worktable to move up and down. The spindle torque and welding depth are adjustable. It can be welded with or without salt water.
The spindle speed is 0-300 rpm.
The moving speed of the worktable is 0-165mm/s.
Adjustment of the amount of brine injection.
This equipment can minimize the scrap rate of workpiece processing during processing. Except for manual unloading, other processes are carried out automatically. The accuracy of the servo system, the continuous movement of the cylinder, simple operation and stable performance, can not only improve production efficiency, but also ensure the quality of the product。

II-4 Component Function
1. Servo welding system and servo lifting system
2. Pneumatic salt water injection system

II-5 Machine Performance
With good work efficiency, each station can be operated separately at the same time;
The welding of this machine has the characteristics of high strength and good performance;
Adopt automatic control technology to make welding operation easy and simple;
No pollution, no waste, more environmentally friendly

III Machine Structure
The frame is a steel frame structure, welded with domestic high-quality A3 square tube profiles, and the surface is polished, acid pickled, and painted; the steel or aluminum plate of the transmission part is processed by CNC (CNC) to ensure accuracy, and the surface is chemically plated or oxidized Treatment: After the door panel is processed and shaped by a CNC bending machine and a punching machine, the surface is polished, acid pickled, and spray-painted. The whole machine has a strong three-dimensional feeling, beautiful and durable.

IV Operation Process
1. Make sure that the factory power supply (380V) is turned on;
2. Switch the power switch of the equipment to the on position, and wait for 20 seconds (each system of the equipment enters the running state);
3. Switch the manual/automatic switch to automatic,
4. Put the semi-finished products into the upper and lower fixtures respectively
5. Close the safety door and press the start button with both hands
6. The equipment automatically completes salt water injection and welding

7. Open the safety door and take out the welded product?