I. Machine Features:

1. PLC control machine sequence;

2. HMI set machine;

3. Servo Control machine action;

4. Linear way guided tooling action;

5. MP Sonic Designed IR control system by current adjustment;

6. 8 sets of temperature control zooms;

7. Cast-steel jig bed;

8. Auto lubrication system applied;

9. Formula System for welding parameters storage;

10. Welding record system;

11. Accessibility for tooling including vacuum, sliding block, clip, ejection, etc;

12. I/O condition displaying system to show machine current condition;

13. All-around safety protection system including auto door at operation window, optical fence, safety door at two sides and rear, E-stop buttons, alarm system, etc;

14. Alarm system for machine error with source of error displaying on HMI;

15. Remote service system.

II. Optional Features:

1. Auto Tooling change-over system;

2. UPS;

3. Printer.

III. Specification:

1. Model: MSH-IR13075;

2. Power Source: 380V, 3P, AC, 50/60Hz;

3. Air Source: 0.6~0.8Mpa;

4. Machine Dimension: L2450*W2100*H2950 (mm);

5. Power: 47KW;

6. Welding Area: L1200*W700（mm);

7. Jig Plate Area: L1300*W750 (mm);

8. Working Room Temperature: 10~40℃;

9. Working Room Humidity:5~80%;

10. Weight: About 5.5T.

Basic Features:
Servo control system in high precision;
Fast action speed, especially good for low temperature hot platen welding;
Achieves action speed process control (speed-steps-control);
Hot platen melting temperature controlled by PID, welding temperature is controlled in stability and high precision;
Heater error ID is detected and indicated on HMI for easy fault-shooting;
Welding parameters storage is available to manage hot p late welding process;
Alarm message/fault history is recorded for hot plate welding quality management;
Optical fence at front and safety door at sides and rear is designed for security;
Vacuum generator and pneumatic clip system is design to hold plastic parts during hot plate welding;
Ejection function by pneumatic system is designed helping remove welded parts from jigs;
Parts detection function is available to avoid operation without parts loading.

Optional Feature:
1. Auto security front door;
2. Auto jig loading system for quick tooling change-over;
3. Preheating device for efficient welding production;
4. SPC for production management;
5. E-tech for internet;
6. Terminal for printer;
7. Auto electrical plugs and air connectors for jig;
8. Tooling automatic identifying to identify hot plate welding and load welding parameter automatically;
9. UPS for control system;
10. Vacuum pump for high vacuum pressure;
11. Accessories detection to avoid welding unloading small parts;
12. GT sensor function to ensure parts is loaded in right position before operation for plastic welding in high precision.

Specification:
Power Source: 380V 3P? 50/60Hz
Air Source: 0.5Mp;
Dimension:L1550*W2200*H2562 (mm);
Jig Base Plate: 880*650
Suggested Welding Square: <750*600 (mm)
Welding Square: 800*600(mm)
Jig Transmission: High Precision Screw Bar;
Hot Platen Transmission: Gear Bar;
Clips: 4+4;
Accessory Detector on Jig: 6+6
Cavity Parts Detector: 2+2
Temperature Control: 8 Sets
Safety： Optical fence + Auto front door
Vacuum: Vacuum Generator
Cooling for Control Cabinet: Fan
Smoke Exhaust: Exhaust Fan
Heating Alarm: Heating current supervision and alarm
Jig Transmission: High Precision Screw Bar;
Hot Platen Transmission: Gear Bar;
Clips: 4+4;
Accessory Detector on Jig: 6+6
Cavity Parts Detector: 2+2
Temperature Control: 8 Sets

Safety： Optical fence + Auto front door
Vacuum: Vacuum Generator
Cooling for Control Cabinet: Fan
Smoke Exhaust: Exhaust Fan
Heating Alarm: Heating current supervision and alarm

MSH-6550S is mostly applied to weld thermoplastic parts in large size, eg in automotive industry: tail lamp, washer tanks, glove box lid, etc.

I. Main Features：
1. Hot plate melting temperature is PID controlled in accuracy and stability;
2. Welding parameters storage for different plastic parts’ hot plate welding production;
3. Hot plate welding history memory;
4. HMI set machine;
5. Optical fence safety protection;
6. Vacuum, clip and ejectors function is equipped with the machine to meet different requirement;
7. Part loading detection to avoid operation without plastic parts loading;
8. Alarm system safety.

II. Specification:?

I. Main Features：
Servo control system in high precision;
Fast action speed, especially good for low temperature hot platen welding;
Achieves action speed process control (speed-steps-control);
Hot platen melting temperature controlled by PID, welding temperature is controlled in stability and high precision;
Heater error ID is detected and indicated on HMI for easy fault-shooting;
Welding parameters storage is available to manage hot p late welding process;
Alarm message/fault history is recorded for hot plate welding quality management;
Optical fence at front and safety door at sides and rear is designed for security;
Vacuum generator and pneumatic clip system is design to hold plastic parts during hot plate welding;
Ejection function by pneumatic system is designed helping remove welded parts from jigs;
Parts detection function is available to avoid operation without parts loading；

Quick tooling change-over for easy tooling change over (manual type).

II. Specification

Main Features：
1. Machine action is servo-controlled in precision;
2. Hot plate melting temperature is PID controlled in accuracy and stability;
3. Welding parameters storage for different plastic parts’ hot plate welding production;
4. Hot plate welding history memory;
5. HMI set machine;
6. Optical fence safety protection;
7. Vacuum, clip and ejectors function is equipped with the machine to meet different requirement;
8. Part loading detection to avoid operation without plastic parts loading;
9. Alarm system safety.

Main Features：
1. Hot plate melting temperature is PID controlled in accuracy and stability;
2. Welding parameters storage for different plastic parts’ hot plate welding production;
3. Hot plate welding history memory;
4. HMI set machine;
5. Optical fence safety protection;
6. Vacuum, clip and ejectors function is equipped with the machine to meet different requirement;
7. Part loading detection to avoid operation without plastic parts loading;
8. Alarm system safety.